HMR R30-Fire Protection

Tension Rod Oversizing

Our report for static oversizing, according to DIN EN 1993-1-2 (2010), allows us to offer customized solutions for tension rod projects that require a fire resistance of 30 minutes (R30).

Corresponding calculation tables can be provided for all thread sizes upon request.

To top

Fire Protection Coating

HMR750 Tension Rods

If required, we can coat HMR750 Tension Rods with a primer specifically suitable for fire protection coatings.
Intumescent paint in accordance with R30 or R60 can later be easily applied to these on site (a certain minimum rod diameter is required).
more

HMR Steel Products

For HMR Steel Products, Haslinger Services offers both fire protection and corrosion protection in accordance with DIN EN 12944.

With the coating system we use, we produce thin, smooth surfaces from 0.5 to 4 mm, which make the workpiece appear more visually appealing. In addition, our coating system is characterized by fast drying times and good curing. The steel parts are better protected against pressure points or damage.

Fire protection can be applied directly to the blasted steel and corresponds to the corrosivity category C3 high.
An additional top coat meets higher corrosivity requirements.
more

HMR Compression Struts

HMR Compression Strut Systems can be primed like steel parts or delivered with a fire protection coating.
more

To top


We want to provide the most important information and services for you in the best-possible way. To do this, we need your consent to use the ‘Matomo’ web analysis tool to create and carry out an pseudonymous evaluation of your visit for statistical purposes. Your consent is valid for 12 months.